Some posts on this topic have stated that a very high MW field intensity resulting in an FCC NOUO for the operator was the result of that operator not even trying to be Part 15 compliant. But that isn't necessarily true.
Recently the FCC issued a Part 15 AM NOUO based on the 8400 µV/m groundwave field intensity they measured at a distance of 89 meters from the transmit antenna.
The first link below shows that such a field intensity could be produced at that distance by a moderately-efficient transmitter with 100 mW of d-c input power using the "elevated" mounting described in the NOUO, an r-f ground consisting of a 2-meter buried rod at the base of the antenna structure, and an earth conductivity of 8 mS/m. Other hardware/earth conditions with a transmitter input power not exceeding 100 mW [compliant with §15.219(a)] also could produce that field at that distance.
However the elevated mounting described in this NOUO (and others) is/has been suggested in the installation descriptions of some suppliers of transmitters popularly used by unlicensed operators. So those operators logically could believe that installing the transmitter using an elevated configuration would not lead them to the risk of getting an FCC NOUO.
Likewise installing such a transmitter/antenna system configuration would not become proof that the operator chose to be willfully non-compliant with §15.219(b) -- if s/he was following the installation information given in the documentation for the transmitter.
There may be some unlicensed operators understanding all this who still chose to be non-compliant with §15.219. But probably the majority of the FCC Part 15 AM NOUOs have been issued to operators who innocently believed their systems were compliant -- even those using transmitters FCC-certified for Part 15 AM.
Analysis of NOUO:
http://i62.photobucket.com/albums/h85/rfry-100/Part_15_AM_NOUO_zpsec8f3673.jpg
Link to the NOUO for this case:
http://transition.fcc.gov/eb/FieldNotices/2003/DOC-321497A1.html
Recently the FCC issued a Part 15 AM NOUO based on the 8400 µV/m groundwave field intensity they measured at a distance of 89 meters from the transmit antenna.
The first link below shows that such a field intensity could be produced at that distance by a moderately-efficient transmitter with 100 mW of d-c input power using the "elevated" mounting described in the NOUO, an r-f ground consisting of a 2-meter buried rod at the base of the antenna structure, and an earth conductivity of 8 mS/m. Other hardware/earth conditions with a transmitter input power not exceeding 100 mW [compliant with §15.219(a)] also could produce that field at that distance.
However the elevated mounting described in this NOUO (and others) is/has been suggested in the installation descriptions of some suppliers of transmitters popularly used by unlicensed operators. So those operators logically could believe that installing the transmitter using an elevated configuration would not lead them to the risk of getting an FCC NOUO.
Likewise installing such a transmitter/antenna system configuration would not become proof that the operator chose to be willfully non-compliant with §15.219(b) -- if s/he was following the installation information given in the documentation for the transmitter.
There may be some unlicensed operators understanding all this who still chose to be non-compliant with §15.219. But probably the majority of the FCC Part 15 AM NOUOs have been issued to operators who innocently believed their systems were compliant -- even those using transmitters FCC-certified for Part 15 AM.
Analysis of NOUO:
http://i62.photobucket.com/albums/h85/rfry-100/Part_15_AM_NOUO_zpsec8f3673.jpg
Link to the NOUO for this case:
http://transition.fcc.gov/eb/FieldNotices/2003/DOC-321497A1.html