Was reading a article about ME-TV 87.7FM in Chicago.. it appears the fcc has now grandfathered them and they don’t have to renew every 6 months anymore .
WRME-LD is arguing that it should be permanently allowed under the provision for DTV stations to provide "ancillary services" as long as they don't cause interference, but is still filing the STA applications "out of an abundance of caution".From what i read this is permanent. Has anyone else filed for a extension?
3.0 is backed by the FCC, and will slowly start integrating into lower-priced TVs without the consumer noticing. I would hope/presume it doesn't fail, because it is the more robust standard that we deserve!If ATSC 3.0 fails in the marketplace and all of the ATSC 3.0 signals are changed back to ATSC 1.0 or turned off, has anyone checked to see if this Ch. 6 DTV + FM scheme will work reliably with ATSC 1.0 (IIRC, ATSC 1.0 BW ~5.6MHz, ATSC 3.0 BW ~5.5MHz)?
Kirk Bayne
Please be right!Was reading a article about ME-TV 87.7FM in Chicago.. it appears the fcc has now grandfathered them and they don’t have to renew every 6 months anymore .
“We reached a critical point last July where the FCC had imposed a deadline, whereby they required all 87.7 stations to be digital or go off the air,” he explains. “The owners of the 87.7 stations (Venture Technologies Group) got special dispensation because they installed unique proprietary transmission technology that allowed 87.7 Chicago to go as a digital station. So, that meant we were able to comply with FCC regulations, and from what we hear, this will satisfy the FCC from now on. There’s no end date any more.”
Sounds to me that they are here to stayHere's an article that updates the situation:
There are several other stations that utilize this technology.
No it won't. ATSC version 3 allows in channel interference to be a -1DBc where is ATSC V1 is 15DB worse. To make an FM signal work with 8VSB would require the FMs to drop their FM Carrier 15DB at minimum..maybe 20db. Too much power loss to be worth itIf ATSC 3.0 fails in the marketplace and all of the ATSC 3.0 signals are changed back to ATSC 1.0 or turned off, has anyone checked to see if this Ch. 6 DTV + FM scheme will work reliably with ATSC 1.0 (IIRC, ATSC 1.0 BW ~5.6MHz, ATSC 3.0 BW ~5.5MHz)?
Kirk Bayne
Chicago,New York, Boston are making it work just fine not a single issueNo it won't. ATSC version 3 allows in channel interference to be a -1DBc where is ATSC V1 is 15DB worse. To make an FM signal work with 8VSB would require the FMs to drop their FM Carrier 15DB at minimum..maybe 20db. Too much power loss to be worth it
Is the Tijuana station at 87.70, or at 87.75 like the U.S. Franken FM stations are? The problem with 87.75 is that it distorts on most of my digital FM tuners due to it being off frequency. One of my tuners which has 0.1 MHz stepped tuning actually sounds better locking into WNYZ-LD on 87.8 than on 87.7.The thing that never made sense to me is that while the FCC is restricting the use of 87.7 as a radio frequency, there is an 87.7 in Tijuana that blasts into San Diego and they don’t have to follow these FCC restrictions. Does that interfere in any way with ATSC 3.0’s rollout in San Diego?
Good call on that one, I just checked on my CCradio 2e which tunes in increments of .05 and the Tijuana station is in fact at 87.75 and not 87.7. I always wondered why the station sounded a little off on my car radio at 87.7. Now I know why! The Tijuana station is broadcasting at 87.75.Is the Tijuana station at 87.70, or at 87.75 like the U.S. Franken FM stations are? The problem with 87.75 is that it distorts on most of my digital FM tuners due to it being off frequency. One of my tuners which has 0.1 MHz stepped tuning actually sounds better locking into WNYZ-LD on 87.8 than on 87.7.
Now that analog TV is gone there is no reason for these Franken-FMs to transmit at 87.75 instead of 87.7.
87.75 was the official audio carrier frequency for analog TV on channel 6, but that analog TV system no longer exists, so there is no need to conform to that standard anymore. (And not that they bothered conforming to the 25 kHz deviation and MTS stereo TV standards even when they were still transmitting an analog TV signal -- AFAIK all Franken-FMs used 75 kHz deviation, and the FM MPX system if they transmitted in stereo. Tuning them in on an actual analog TV set produced very loud and distorted audio.)
The analog audio signal is now an "ancillary service" of ATSC 3.0 for FM radio listeners, so there's nothing against them putting it at 87.70 or maybe even 87.9 MHz.
Agree. My more selective radios (such as my trusty C Crane Pocket) don't do well picking up 87.7 MeTV FM from Chicago from my distant suburban location. Yet, the less selective radios pull it in better than many other Chicago signals. It's that .05 MHz offset that throws them off. Get rid of that and it will improve reception for many people (most of whom simply think they have a poor signal).You cant move it to 87.9 that would bump what is channel 200.. which only has one signal left on it in the US.. but its still a valid channel. I say move channel 6 audio to 87.7