• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Antenna rotator problem

D

DXER1

Guest
I have brought an antenna rotator over Christmas and have a problem. Ok heres's the problem. I can't get the control unit that sits on top of my tv to turn on leaving my antenna stuck in the east position leaving me with the Tyler TV stations coming in. The model is phillips SDW1850/17

I have unplugged the unit and pluged it back in nothing, tried disconnecting the wires from the control unit to the rotator unit and reconnected them, Again nothing. I even went as far as reseting the control box, Nothing. I'm totaly stummped and can not for the life of me figure this one out. If anyone knows what could be going on please either reply or email me at bhcjazzer02_at_verizon_dot_net and please put rotator unit on the subject line. I appriciate anyone who can help me with this. Thanks in advance

DXER1
 
DXER1 said:
I have brought an antenna rotator over Christmas and have a problem. Ok heres's the problem. I can't get the control unit that sits on top of my tv to turn on leaving my antenna stuck in the east position leaving me with the Tyler TV stations coming in. The model is phillips SDW1850/17

I have unplugged the unit and pluged it back in nothing, tried disconnecting the wires from the control unit to the rotator unit and reconnected them, Again nothing. I even went as far as reseting the control box, Nothing. I'm totaly stummped and can not for the life of me figure this one out. If anyone knows what could be going on please either reply or email me at bhcjazzer02_at_verizon_dot_net and please put rotator unit on the subject line. I appriciate anyone who can help me with this. Thanks in advance

DXER1
Click to expand...

Ok here is the 1st dumb question: have you contacted Philips about it??
Also did it EVER work??? was it used or new??? COuld be an inertnal fue...are you meaning the CONTROL box wont come on or the rotor wont MOVE?? but again, did you try contacting Philips support? Here is the link (watch for the wrap)....

http://www.p4c.philips.com/cgi-bin/...roductInformation&hlt=Link_ProductInformation
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom