• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Digital STL Help

N

NSRadio

Hi all-

We run a Moseley DSP6000 digital encoder for our STL system. I'm trying to turn on the second data channel for use with our RDS encoder.

The problem is, every time I change the mode on the DSP6000 to allow for both data channels to be functional, the unit has a system fault. It doesn't seem to matter what mode I change the unit to, it's only functional in 2 audio channel, 1 data channel mode.

Anybody else with a DSP6000 out there that has any advice?

Thanks!
 
If you specified a two channel DSP6000 when it was ordered,
you may not get that second data channel. A four channel
unit may be required (different chipsets are installed depending
on how many channels are required).
 
Thanks ncradioeng-

You're right - there was a sticker on the side identifying the unit as 2-channel. I wasn't aware that they made seperate versions of the processor.

Thanks again for the help!

> If you specified a two channel DSP6000 when it was ordered,
> you may not get that second data channel. A four channel
> unit may be required (different chipsets are installed
> depending
> on how many channels are required).
>
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom