• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Gentner/Comrex DH20 Remote

U

URradiolistener

Hey guys!

I am curious about getting a Gentner DH20 Phone Hybrid but I cannot find ANYWHERE a Teleswitch to control multiple lines for the system. Does anyone know where a good working Teleswitch is or of an affordable device that will work with the remote capabilities?
 
You have a number of options:

1) Build a switcher. Nothing very complicated is required. An old 1A2 phone makes a good platform to build on

2) Use a Telos Direct Interface module to switch the lines

3) Use a Telos 1A2 module and a 1A2 Key system

4) Use the broadcast tools TS-6 Teleswitch

5) Use a passive audio switcher (must pass DC).

6) Use a separate hybrid for each line

I hope this helps. Number 4 is probably the easiest/most affordable option.

URradiolistener said:
Hey guys!

I am curious about getting a Gentner DH20 Phone Hybrid but I cannot find ANYWHERE a Teleswitch to control multiple lines for the system. Does anyone know where a good working Teleswitch is or of an affordable device that will work with the remote capabilities?
Click to expand...
 
I may have a Teleswitch in storage. Let me check tomorrow. Email me privately if you like - broadcast_eng(at)comcast.net

RFB
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom