• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

How to...

S

SFM-Ptgal

Having 9 cart playback decks and 3 cart inputs on the console I wish to put 3 cart players on each input. Now I need to know how to accomplish that:
- Can I simply solder all 1's 2's and 3's and plug to the console or should I made a resistive joint(?)? If so how and what values?...

Cart machines are 600 ohm ITC's....

TIA

Pedro
 
If the board input is 600 ohms balanced, you can simply connect a pair of 150 ohm resistors on each output and them parallel them all together. The input pots also need resistors so for three machines per pot you'd need 8 resistors per pot.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom