• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

ITC Delta III

A

al_atl

Guest
I have an old ITC Delta III I'm playing around with. Yes...really. I want to set it up for sequential playback...so that deck 1, when it senses the secondary cue, will start deck 2 etc. I'm guessing there is a jumper that has to be inserted or removed somewhere for this? Or maybe some connections made between the remote connectors (15 pin D connectors) on the back? Anyone know?

Thanks for your help.

Allen
 
Find the sec tone normally open relay contacts on deck 1 remote connector and wire them to the remote start and ground connections on deck 2 remote connector. Then do the same from deck 2 to deck 3. If you wire from deck 3 to deck 1, you may want to put a switch in the line to stop it from continuously playing carts.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom