• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Little help with radiomixer-12?

K

keyjock

Guest
I've a refurbed radiomixer-12 with a Telco Mix module. Also a Telos One hybrid. This is for my in-home VO production studio. What I am trying to do is bring up a caller on the board. I am also recording with the board output going directly to my computer.
Have run into a little confusion as to the hook up. I've figured out the input from the board into the hybrid, but I'm lost with the output of the telos one back to the board. Does the Telos out go directly another line module or back to the telco module. When I go directly to a line module, I hear the caller and see the meter moving, but nothing is being recorded.
Anyone? Oh, I'm not an engineer, obviously :(
 
You need to wire the Telos output (caller audio) to an input module (not the telco mix module). This module needs to have its S11 dip switch #1 or #2 set to "closed" for the input (A or B) that you have the caller wired to. For example if you have the Telos output wired to the A input then dipswitch #1 needs to be set to "on" (closed). Then set S8 up or down to assign this audio as Telco 1 (up - usually this is the case for a single hybrid) or Telco 2 (down). This keeps the caller audio from the Telos input (mix-minus). If you have one of the program outputs connected to your computer you should see any audio assigned to that program channel (including the caller).
 
> You need to wire the Telos output (caller audio) to an input
> module (not the telco mix module). This module needs to
> have its S11 dip switch #1 or #2 set to "closed" for the
> input (A or B) that you have the caller wired to. For
> example if you have the Telos output wired to the A input
> then dipswitch #1 needs to be set to "on" (closed). Then
> set S8 up or down to assign this audio as Telco 1 (up -
> usually this is the case for a single hybrid) or Telco 2
> (down). This keeps the caller audio from the Telos input
> (mix-minus). If you have one of the program outputs
> connected to your computer you should see any audio assigned
> to that program channel (including the caller).
>


Thanks a bunch, works perfect. I figured it would be something as simple as a dip switch.(in fact, it's stated in the manual, duh me!)
Did notice though, S8 is actually S10 on my line module.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom