David brings up a serious problem regarding "upgrading" AM facilities. Owners, managers, advertisers, and program syndicators are often obsessed with the power of a station. Engineers can tell them all day about potential pitfalls, and they don't believe it. Or worse, say the engineers are not team players for not seeing such moves as a positive thing.
Under newer rules, Class Bs/IIIs on Regional Channels are no longer limited to 5000 watts, but are allowed to be 50000 watts in theory. When the rules first changed, stations seemed confused. It was a few years before WTMJ and WRC increased power. Later, when stations were identified with characteristics suitable for upgrades, a larger number applied. I knew that even at best, there were downsides to the upgrades I had identified informally in my region. Radio is one of the most talkative industries, and information often finds its way to stations and competitors before the managers leave for the day.
My advice is that any AM station contemplating such an "upgrade" should do a detailed conductivity study with a temporary antenna of any new site they may use. They should also study conductivity of other station sites that they think need to be removed to "upgrade". They should look at service contours to identify areas and population that may lose good service as well as areas of signal improvement. As David has stated, they need to look at higher level contours in this day and age. At minimum, the measured conductivity 5, 10, 25, 50, and 100 mV/m contours and areas and population affected need to be studied.
In my region, "upgrades" were not unqualified successes, and more than one began simulcasting on a full power FM facility nearby. These were nondirectional Days since the 1920s before the upgrades, and now are highly directional Day and Night. At least one really didn't have to eliminate another station to upgrade, once DA Proofs of Performance and related radial extensions were performed for various applications.
Some sources identify highly developed urban areas as typically only 1 mS/m on numerous applications, regardless of M-3 estimates.
Under newer rules, Class Bs/IIIs on Regional Channels are no longer limited to 5000 watts, but are allowed to be 50000 watts in theory. When the rules first changed, stations seemed confused. It was a few years before WTMJ and WRC increased power. Later, when stations were identified with characteristics suitable for upgrades, a larger number applied. I knew that even at best, there were downsides to the upgrades I had identified informally in my region. Radio is one of the most talkative industries, and information often finds its way to stations and competitors before the managers leave for the day.
My advice is that any AM station contemplating such an "upgrade" should do a detailed conductivity study with a temporary antenna of any new site they may use. They should also study conductivity of other station sites that they think need to be removed to "upgrade". They should look at service contours to identify areas and population that may lose good service as well as areas of signal improvement. As David has stated, they need to look at higher level contours in this day and age. At minimum, the measured conductivity 5, 10, 25, 50, and 100 mV/m contours and areas and population affected need to be studied.
In my region, "upgrades" were not unqualified successes, and more than one began simulcasting on a full power FM facility nearby. These were nondirectional Days since the 1920s before the upgrades, and now are highly directional Day and Night. At least one really didn't have to eliminate another station to upgrade, once DA Proofs of Performance and related radial extensions were performed for various applications.
Some sources identify highly developed urban areas as typically only 1 mS/m on numerous applications, regardless of M-3 estimates.
Last edited: