What is the correct # lamp for the meter/transmit bulb? It's not in the manual (!).And the previous engineer left an empty socket...
-
Get involved.
We want your input!
Apply for Membership and join the conversations about everything related to broadcasting.
After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
If you use a disposable or false email address, your registration will be rejected.
After your membership is approved, please take a minute to tell us a little bit about yourself.
https://www.radiodiscussions.com/forums/introduce-yourself.1088/
Thanks in advance and have fun!
RadioDiscussions Administrators
Marti RPT-40
- Thread starter HadYourPhil
- Start date
None of the RPT40s I maintained had a socket. Just a lamp with leads soldered to the board.
There is a resistor in series with the lamp. Schematic shows the power's from the 13.5 volt supply.
I replaced the lamp with a white LED, changing the resistor for the right current.
There is a resistor in series with the lamp. Schematic shows the power's from the 13.5 volt supply.
I replaced the lamp with a white LED, changing the resistor for the right current.
Strange. I have two. Both with sockets and no bulbs. Thanks for the LED trick. I will look into doing that.
- Status