• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Mega's Processing

O

occupant

Guest
So I'll admit I don't often listen to Mega, but it does occupy a place on my second set of presets. I tuned in the other day, and was shocked by how bad the station sounded. They kept trumpeting their newly improved signal on 104.3, but both frequencies only sound marginally better than AM. Is there any reason for this, or do they just not have a competent engineer to handle their processing?
 
occupant said:
So I'll admit I don't often listen to Mega, but it does occupy a place on my second set of presets. I tuned in the other day, and was shocked by how bad the station sounded. They kept trumpeting their newly improved signal on 104.3, but both frequencies only sound marginally better than AM. Is there any reason for this, or do they just not have a competent engineer to handle their processing?

On Thursday night Mega had some technical problems and was nothing but carrier for hours. By Friday morning, they had fired up their Payson transmitter as they worked on the new rig. The sound quality improved while they were back on from the rim. Later that afternoon, they returned to the air from the Bradshaws and their audio was not fixed.

I figure that they haven't gotten to problem-solving the audio chain issue because

1. It's got to be a tough climb to their new site, especially during monsoon season.

and

2. Their contract engineer is the Chief Engineer for another Valley radio cluster.

I figure someone involved with this situation is reading these boards, and should be aware of what needs to be done to make the station sound clean again.
 
1. It's got to be a tough climb to their new site, especially during monsoon season.

three hour drive one way to the site

2. Their contract engineer is the Chief Engineer for another Valley radio cluster.

yes

I figure someone involved with this situation is reading these boards, and should be aware of what needs to be done to make the station sound clean again

the "contract engineer" is not controlling the audio processing
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom