• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Need some manuals

F

Fred Richards

I'm looking for a good quality PDF copy for a Modulation Sciences CP-803 composite clipper. If there were any differences based on age, I'm guessing this one was built in the late 80s. The copy I found on a web search does not have enough resolution to read component values.

I have some spare time on my hands at home, and want to see if I can resurrect some equipment deemed total loss. I figure it would be a good challenge to see if I could bring it back to life, starting first with a unit involved in a flood. Any help with a good copy appreciated.
 
I have a PDF which has an impossible to read schematic - which is strange given the rest of the manual is clear and easy to see.
The board layout is readable (just - you may have to do some elimination) showing component numbers, and there's a parts list showing each component and its reference to the board layout.
I suspect it may be the same PDF you found, as I am sure I got my copy off the web as well.
 
Studio1 said:
I have a PDF which has an impossible to read schematic
Click to expand...
That sounds like the same Revision 2 PDF that I have, with the unreadable schematic on page 23.
 
Dale H. Cook said:
Studio1 said:
I have a PDF which has an impossible to read schematic
Click to expand...
That sounds like the same Revision 2 PDF that I have, with the unreadable schematic on page 23.
Click to expand...

Yes, that's it - page 23. Whoever scanned this into a PDF needs to go back to school. How can you make a PDF and not check it for legibility? It's not like it's a minor issue either. The schematic simply cannot be read.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom