Maybe... This is my wish and the purse strings might finally be opening. Since February of 2010 my homemade processor combo has been on the air. (Orban Optimod-TV 8282 feeding an Optimod 2200) In December of 2010 a CP-803 composite clipper was added. The original threads on my fun experiment are here in case you never read them:
http://boards.radio-info.com/smf/index.php?topic=162668.0
http://boards.radio-info.com/smf/index.php?topic=183233.0
Now, I don't think that this is the best thing in the universe, but I feel safe saying that if I invited some 'good ears' to my market to take a listen to all the stations on the FM dial, they would not be able to pick out this processing chain from the others on the basis of "poor quality"... In fact others with newer processors have sounded marginally worse, including one station that until very recently, was running with a VERY unacceptable level of distortion!
The recent purchase of a solid-state transmitter to replace the aging Harris has improved the sound greatly, and now the powers that be are thinking (just thinking) that a new car runs much better when it doesn't have to have a used exhaust system!
Now, my wish list will start 'at the top' and work it's way down... Oh, and HD is currently not a factor of consideration. The big guns in the market do NOT have it, and the only other indy competitor is installing HD solely for the purpose of filling up FM translators with different programming from the HD-2 and HD-3 formats. The only other HD is a PBS station.
There are four local stations nearest in format that I would call 'competitors'. Their processors are (to the best of my most recent knowledge) An Omnia 6, 1 Omnia 3 turbo, and an 8200. Of these, the Omnia 6 and the 8200 would be followed by a composite clipper. I do not know if there is one after the Omnia 3 turbo. I believe the last station to be using an Omnia processor of some sort. This station sounds pretty good, but is using low clipping settings and overmodulating to sound as loud as others.
Now, to my list! This is from most desired to least based on my 'gut' feelings, since I have never been able to test drive any of the units listed.
1. Omnia.11
2. Omnia 9 (aka "Breakaway" box)
3. Optimod 8600
If the 'big' purse does not open up, on to the lesser wish list:
4. Used Optimod 8400, 8300, 5300, etc.
5. Used Omnia 6
6. New Omnia One
Maybe the Omnia One would move up the list if I could hear one first. If we were able to be the first in this tiny market to put one of the new "cannons" on the air, it might force the bigger guys to upgrade their clusters... Hmmm...
At any rate, my previous experiment was fun, but it's time to move on... Particularly since during a recent power outage, the 8282 failed to come back up in 'working' mode, causing dead air until the power could be cycled manually.
I am curious to hear opinions about what others would be looking at, both on the 'expensive' side and the 'cheaper' side.
Also, what are the REAL street prices on the new Omnias? I have seen the 8600 for around 9 grand (non HD)
http://boards.radio-info.com/smf/index.php?topic=162668.0
http://boards.radio-info.com/smf/index.php?topic=183233.0
Now, I don't think that this is the best thing in the universe, but I feel safe saying that if I invited some 'good ears' to my market to take a listen to all the stations on the FM dial, they would not be able to pick out this processing chain from the others on the basis of "poor quality"... In fact others with newer processors have sounded marginally worse, including one station that until very recently, was running with a VERY unacceptable level of distortion!
The recent purchase of a solid-state transmitter to replace the aging Harris has improved the sound greatly, and now the powers that be are thinking (just thinking) that a new car runs much better when it doesn't have to have a used exhaust system!
Now, my wish list will start 'at the top' and work it's way down... Oh, and HD is currently not a factor of consideration. The big guns in the market do NOT have it, and the only other indy competitor is installing HD solely for the purpose of filling up FM translators with different programming from the HD-2 and HD-3 formats. The only other HD is a PBS station.
There are four local stations nearest in format that I would call 'competitors'. Their processors are (to the best of my most recent knowledge) An Omnia 6, 1 Omnia 3 turbo, and an 8200. Of these, the Omnia 6 and the 8200 would be followed by a composite clipper. I do not know if there is one after the Omnia 3 turbo. I believe the last station to be using an Omnia processor of some sort. This station sounds pretty good, but is using low clipping settings and overmodulating to sound as loud as others.
Now, to my list! This is from most desired to least based on my 'gut' feelings, since I have never been able to test drive any of the units listed.
1. Omnia.11
2. Omnia 9 (aka "Breakaway" box)
3. Optimod 8600
If the 'big' purse does not open up, on to the lesser wish list:
4. Used Optimod 8400, 8300, 5300, etc.
5. Used Omnia 6
6. New Omnia One
Maybe the Omnia One would move up the list if I could hear one first. If we were able to be the first in this tiny market to put one of the new "cannons" on the air, it might force the bigger guys to upgrade their clusters... Hmmm...
At any rate, my previous experiment was fun, but it's time to move on... Particularly since during a recent power outage, the 8282 failed to come back up in 'working' mode, causing dead air until the power could be cycled manually.
I am curious to hear opinions about what others would be looking at, both on the 'expensive' side and the 'cheaper' side.
Also, what are the REAL street prices on the new Omnias? I have seen the 8600 for around 9 grand (non HD)