• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Older Mac G-3

R

ron shannon

Any of you Mac guys out in the Dallas area have any experience w/G-3's? trying to set one up w/0sX and the boarders on the monitor are off screen. I haven't had any luck reseting it. The monitor is an RGB High Res, model M0401. OK I know the machine is(vintage) but its a project. E-Mail me at [email protected] for my cell no.
 
You don't indicate which G3 you have (beige or blue & white) but you might have to go into the System Preferences, click on the Monitor icon and change the scan rate/screen size. You should find one that will match perfectly.

Usually OS X is very good at determining the monitor you're using and setting the scan rate/screen size automatically. But if you're using Jaguar with a beige G3, for example, you may have to set these manually.

C5
 
To those of you who responded to my cries for help, and especially Mr. Laurence, Thanks. This is how I finally solved my problem. I purchased a Mac to VGA adapter from Cables to GO and plugged into a new wide screen monitor, I am now good to go. Thanks guys.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom