• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

OMNIA 6EX REMOTE OVER ETHERNET

M

menotti1

Guest
Trying to do latest update.using crossover cable with HP laptop with vista ,firewall off.not sure of any known issue using vista.ethernet box is checked, ip 192.168.0.85 port 23.i know tomtom is the password for serial and i have tried all 3 0f the other level passwords,lower case.continue to get the cannot open port error.must be an oversight on my part,sure appreciate your input.
 
hate to answer my own post, but i think the last 3 of the IP should be 191.maybe Frank can chime in.after the udate will the o6 return to the present preset and will the trigger script remain or have to be redone.thanks...
 
menotti1 said:
Trying to do latest update.using crossover cable with HP laptop with vista ,firewall off.not sure of any known issue using vista.ethernet box is checked, ip 192.168.0.85 port 23.i know tomtom is the password for serial and i have tried all 3 0f the other level passwords,lower case.continue to get the cannot open port error.must be an oversight on my part,sure appreciate your input.
Click to expand...

You can use any IP address with Omnia. If you are "pointing" to the IP address in the unit, and have the correct password, you will be able to connect. If you are still having problems, please contact our Support Engineering Dept, and they will be happy to assist you.

-Frank Foti
 
menotti1 said:
Trying to do latest update.using crossover cable with HP laptop with vista ,firewall off.not sure of any known issue using vista.ethernet box is checked, ip 192.168.0.85 port 23.i know tomtom is the password for serial and i have tried all 3 0f the other level passwords,lower case.continue to get the cannot open port error.must be an oversight on my part,sure appreciate your input.
Click to expand...

The Level 3 password for serial connections is 'tomtom', but for IP connections it's 'engineer'. The actual IP address is irrelevant - it can be any number as long it's valid on your network (IOW, you can access it). Make sure the subnet mask is OK, too.

For serial connections, if you get port open error sometimes you have to reset your computer to get it back. It can get stuck open and you just have to restart your PC.


Regards,
Goran Tomas
 
Working great now.thanks Frank and Goran.Gotta tell you Omnia support is hard to beat and Mark in customer support is so easy to talk to and just a great attitude.Mr Foti,you have a top notch staff.
 
menotti1 said:
Working great now.thanks Frank and Goran.Gotta tell you Omnia support is hard to beat and Mark in customer support is so easy to talk to and just a great attitude.Mr Foti,you have a top notch staff.
Click to expand...

Thank you!! Glad to know that all is well! :)

-Frank Foti
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom