• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Programming a ABR202

T

taylorengineer

Anyone know what kinda' cable you use to talk to a ABR202 Sat Rcvr?
The ABR200 uses a RS232 cable and Hyperterminal will work....that will not work on the 202. They mention a cable adaptor you buy from them.....I need the pinout if someone has one.
Since Rad/Comstream is west coast it will be noon before I can speak with tech support.....my morning show is off the air until I get the 202 programmed.
Any help will be appreciated.
 
taylorengineer said:
Anyone know what kinda' cable you use to talk to a ABR202 Sat Rcvr?
The ABR200 uses a RS232 cable and Hyperterminal will work....that will not work on the 202. They mention a cable adaptor you buy from them.....I need the pinout if someone has one.
Since Rad/Comstream is west coast it will be noon before I can speak with tech support.....my morning show is off the air until I get the 202 programmed.
Any help will be appreciated.
Click to expand...

I have NO problem using the same cable for 200's & 202's. Straight thru cable...3 to 3, 2 to 2. I don't use hyp-term though. I like ABRTERM. YMMV
 
Thanks Mike!
I got tech support and did the reset on the aux port....that got me going! You're correct....it's a straight cable and the same setup as the 200.
Thanks again.
Tom
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom