• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Removing the Motherboard from the DAP

Mike Phillips

Mike Phillips

Does anyone remember the procedure for removing the motherboard (the interconnect board, in my words) on the Dorrough DAP? The board has to be removed to replace an edge card connector. It looks like an angled Phillips screwdriver may work, or maybe the meters have to be removed. There are a couple of screws in the middle that look like they would be a bear to get the spacers back in place.

Search the deep crevices of your memory. I've rebuilt many of these and am getting ready to do three more, but I have never had to remove the motherboard.
 
Thanks, but I have the original manual, as well. It doesn't mention removing the motherboard, as I recall. Maybe I should check it.

The manual is also available online from Dorrough's website.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom