• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Sage EAS Model 3644 - Possible To Change Web Server Port?

J

Jay77

Guest
Is it possible to change the web server port on the new Sage Model 3644?
 
I have the same question! The manual is almost useless on that unit. A lot of my routers don't like to forward port 80 and/or it's being used for something else.
 
I'll have to look into that. The manual with it is almost useless, so if someone has a shorthand explanation of how to do it I and many others on this board would be grateful.
 
Port 80 on my sonicwall is web.

Was needing to give Sage a different port.

I can't tell sonicwall to look for the device ip as it needs an access rule / port associated with it.
 
Hello.

MAKE SURE YOU MANUALLY TURN ON THE WEBSERVER ON THE ENDEC FIRST!!! (use the buttons on the endec)

Install the ENDECSetD software.
http://www.sagealertingsystems.com/support-pc.htm

In the network tab, at the bottom you can tell it what port number.
http://www.kc103.com/endec.jpg

Then save the file and then upload (restore) it to your endec.

The endec will restart and use it. You'll need to reconnect. I've never been able to connect the software directly to the endec. I just always upload the file.

Does this work for you?

JR
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom