• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Sage Endec

K

krush99

Hello,

I can't figure this out on my own, so help me.

I want Simian to send a serial command to my Sage Endec 1822 to tell it to do a RWT.

What is the serial string that I need to send?


Thanks
Jake
 
Doesn't that have a relay? If it were me, I'd want to reserve the serial for other hardware that might pop up in the future (starguides, switchers?).<P ID="signature">______________
</P>
 
Yes, there is a "GPI" (contact closure input) on the back on the endec that you can set up to do an RWT. I'm not near a manual right now so I cannot look it up but but support for this box through Harris is really decent...they can talk you through however you want to do this an RWT (that's why they are there) - 217-221-7560

regards,
Joe


> Doesn't that have a relay? If it were me, I'd want to
> reserve the serial for other hardware that might pop up in
> the future (starguides, switchers?).
>
 
I know most "automation" systems like Scott Studios, Prophet, etc.. can put out an RS232 stream to control the Sage. But I can't find it on the web.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom