• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Settings for Re20 with 528 (old model)

I

ILOVERADIO2

Guest
Looking for basic setting for a RE-20 setup with the Symetrix 528. Main on-air mic.
 
compression radio 2:1
threshold -10
EQ to taste
Expander, just enough to take out some room noise but not cut off speech

Those are good starting points.
 
ILOVERADIO2 said:
Looking for basic setting for a RE-20 setup with the Symetrix 528. Main on-air mic.
Click to expand...

Keep the bandwidth on the parametric eq settings fairly wide. My preference is about 3db
boost on the low and high bands and flat on the mid. I'd go 3:1 on the compression but no more.
I would adjust the comp setting to get about 6-9 db of compression and the downward
expander to cut down room noise to about -20 or so on the meter.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom