source for SSM 2013 IC for Aaaarg-GAAAAAK-is console ?

[mr_elbows]

that's rightI've got one of the POS'sany sources other than (ugh) the factory ?thanks to any and all in advanceGary

 

[jammerdave]

http://www.1sourcecomponents.com/partinfo/ssm2013.htm ????http://www.mark5.co.uk/proddetail.php?prod=SSM2013 81 pounds british!http://www.britishaudioservice.com/shop_trace_intgrtcircut.shtml 15 bucks from britainAll I was able to scrounge up.. good luck!df

 

[jammerdave]

Wait.. what series arrakis do you have? I just gutted the modules from some retired 12000 series.Iz that them? I can't remember..Let me know, and maybe I could get you a couple, if that's whats in the 12000'sdf

 

[jammerdave]

;DGood news! I looked at a couple of my modules, and sho-nuff, the ssm2013's are in there.Email me privatly with your mailing address, and I'll send you 4 of them. [email protected]ou'll owe me a cheesburger and a beer someday....  ;Ddave

 

[mr_elbows]

Thanks to a list member, I now have some of themThis group is great.Gary

 

[boiseengineer]

I believe that by "REV C" they had changed to the even more fragile SSM2018. They die due to heat, static, and just because they can.

 

[mr_elbows]

yes, and when the 2018 fails it generally pegs the meter on the failed channelthe 2013 just causes the channel to go dead when it goes belly-upBTDT with both

 

[RadioMan203]

My 1200 series console use the 2018 and I order a sleeve of 25 every half year just so I have extras. I got this board used and within a year I had to replace all of them on the input boards but since then I haven't had any problems. I would bet if I had no spares these things would pop like fuses!FWIW: I had an older 2100 console as well as another 1200 console that had the 2013's and you bet I domped those babies fast!

 

[boiseengineer]

The morning show on one of our stations got in the habit of unplugging the guest mic when not in use. They got burned once by a full-on open mic. No indication it was on untill they turned up the air monitor resulting in feedback. Couple listeners called in too. Last March put a in a new console and they still unplugged the mic.

 

[mr_elbows]

Bill;Where are you getting them (2018's) these days ?I've bought from Newark in the past.Gary

 

[boiseengineer]

Just because it was handy (and I didn't have to use my credit card) I was getting them through Broadacst Supply WW. Arrakis would drop ship them. Now have a stash from a "decommisioned" 12000 that hopefully will last until the remaining 12000 is retired.