• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

TFT EAS Interrupt Units

S

scappy

At what EAS gain level do these ship from the factory? Obviously the program channel is straight through then the relay is de-energized, and the EAS level is adjustable -10 to +10, but does it ship set at unity gain?

Where do most of you have yours set when used with the TFT 911?<P ID="signature">______________
Jon Scaptura
Binghamton Radio Archive
http://www.BinghamtonRadio.com
</P>
 
> At what EAS gain level do these ship from the factory?
> Obviously the program channel is straight through then the
> relay is de-energized, and the EAS level is adjustable -10
> to +10, but does it ship set at unity gain?
>
> Where do most of you have yours set when used with the TFT
> 911?
>

The gain is set unity. Because the FCC rules on the modulation for EAS have decreased, it should be ok. I've installed about a dozen of these boxes, and in only one setup did I have to adjust the level. Most stations I will put them before the STL processor, so that the gain can be brought up via the processor's gain as needed.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom