• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Uh Oh EAS911 Question

D

DaveR

Hi
I have 3 EAS911s here and they are tied into my SS32 to automatically fire local EAS tests. The system works great unless there is a received EAS that has not been cleared by pressing the "MSG WAITING" button. If there is a message in the buffer the EAS911 will not activate when receiving the signal from the SS32 through the 941A interface. I don't recall having this issue with 911s I had years ago, using the same setup. Any idea what I'm doing wrong?
 
DaveR said:
Hi
I have 3 EAS911s here and they are tied into my SS32 to automatically fire local EAS tests. The system works great unless there is a received EAS that has not been cleared by pressing the "MSG WAITING" button. If there is a message in the buffer the EAS911 will not activate when receiving the signal from the SS32 through the 941A interface. I don't recall having this issue with 911s I had years ago, using the same setup. Any idea what I'm doing wrong?
Click to expand...

We had the same problem. The solution was to wire another contact on the automation to the input on the 941A that resets the Msg Waiting light. We then used two commands in the playlist a couple seconds apart. The first would turn off the Msg Waiting light and the second would run the RWT. Worked real well.
 
Thanks FLTec
I was hoping there was another solution, instead of having to make a work around. Thanks for the reply though:)
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom