VRC2000

[SamBuca]

Is there a way to get the Gentner VRC2000 to spit out it's programming? On Sine, you just hit pound and it'll give you the value of the memory location...didn't see that ability on the VRC.<P ID="signature">______________
</P>

 

[ncradioeng]

> Is there a way to get the Gentner VRC2000 to spit out it's
> programming? On Sine, you just hit pound and it'll give you
> the value of the memory location...didn't see that ability
> on the VRC.
>
Not sure what programming you are refering to. If you want the metering constants for instance, you go into the setup mode and enter the metering channel number (i.e. 601) and it will go through all the parameters. If you want it to spit out a string of metering channel values, you program them into a 5** sequence.

 

[SamBuca]

> Not sure what programming you are refering to. If you want
> the metering constants for instance, you go into the setup
> mode and enter the metering channel number (i.e. 601) and it
> will go through all the parameters. If you want it to spit
> out a string of metering channel values, you program them
> into a 5** sequence.

Should have clarified...I need to get all the time of day programming info.<P ID="signature">______________
</P>

 

[ncradioeng]

> Should have clarified...I need to get all the time of day
> programming info.
>
That would be the 3xx in the setup mode. For instance 301# would give you the time of day parameters for the first one (they are factory defaulted to 10hrs 10mins 10secs 10th month). If you enter 301* it will disable the first one (but won't erase the parameters). Don't be in a hurry because it will take awhile to listen if there are a lot of entries (it will hold 64).