• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Wheatstone/Audiotronics PS

S

shure

Looking for a Wheatstone/Audioarts 6040 power supply for the R-60/12 board with the Auditronics logo on it. This was the last board made by Wheatstone under the Audiotronics banner. Identical twin to the R-60.
 
We have both Auditronics 2500's and a newer Wheatstone made R-55. Without hauling them out of the racks, memory is both supplies are third party OEM units that remain currently available. Maybe same for the R-60.

The 2500'ssupplies were modified to mount inside the consoles--mine are now externally rack mounted for better ventilation. Wheatstone also sold us a rack mount supply for one of our 2500's that was obviously originally designed for a different console. If you can figure out the current demands for your R-60, there is probably a work-around to use comparable OEM supplies. Mouser has the square multi-pin crimp connectors used in some of the later Auditronics consoles for the DC wiring harnesses.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom