• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Where to find Harris Impulse analog input card

D

duckfan98

Guest
We have a Harris Impulse console with only 3 analog inputs. We dont use digital except for our 1 automation input. Does anyone know where I can find an analog input card for this console? Or if there are any tricks of getting analog audio into a digital input??? I need to get a guest mic on one of the channels, which right now I only have digital inputs left.

Thanks!
 
2 options get an analog input card or a mic processor with AES output should work fine. Vorsis M1 and M2
have analog and digital outputs.
 
In a worst-case deal you could simply get a mic processor with a digital output. Behringer has a pretty nice line-level analog input to digital converter for a couple hundred bucks. But you'd need to have a preamp most likely before that...
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom