• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

EAS Upgrade

B

Big Dave in Winder

We are looking for an installer to complete our EAS upgrade in Winder. Need to have a non penetrating roof mount put in, FM Receiving antenna and run RG-6 coax to our studio from the roof. Any suggestions or recommendations for a good contractor?
 
Thanks, Dan is our engineer, but he does not want to tackle the roof top antenna. He is installing the equipment though.
 
Tracy Singleton United Tower Company
close by in Monroe
 
Dave, is it just an FM antenna to feed the EAS rx? If so, get a couple of clamps that you can mount to a pipe, like a sewer vent and attach the antennas that way. I have done it with several of my clients and it works great. Much cheaper than a non-penetrating roof mount rig, too.
 
Big Dave in Winder said:
We do not own the building. I may suggest that to the boss though.
Click to expand...

I have used a piece of three foot long 2" dia PVC pipe in the past. anything to get the antenna up of the roof. clamp your FM antenna at the top of the PVC and then clamp the PVC to a vent pipe on the roof. Works like a charm. Good luck.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.


Back
Top Bottom