for all who rely on processing through Cool Edit or Adobe Audition (or any other DE program you might be using) what processing settings are you using? I personally find for voice the best so far is the LIMIT SOFT -18db W/BOOST, and the CLASSIC SOFTKNEE. I am always looking to try out other stuff... does anyone know of any plug ins out there with more stuff?
-
Get involved.
We want your input!
Apply for Membership and join the conversations about everything related to broadcasting.
After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
If you use a disposable or false email address, your registration will be rejected.
After your membership is approved, please take a minute to tell us a little bit about yourself.
https://www.radiodiscussions.com/forums/introduce-yourself.1088/
Thanks in advance and have fun!
RadioDiscussions Administrators
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
voice processing
- Thread starter radioguy4ever
- Start date
When I am processing my voice through AA 1.5 I sometimes use:
Dynamics Processing - VocalComp1/2 +12dB1/2 Fast
DX Plugin: PSP Vintage Warmer (tweaked just right)
and others.
If I am trying to cut through even more, sometimes I'll go into the "Graphic Equalizer" and cut all the frequencies below "400"
Thats the basics!
-Rob<P ID="signature">______________
-NRG Imaging
www.nrgimaging.com
609-338-9074
[email protected]</P>
Dynamics Processing - VocalComp1/2 +12dB1/2 Fast
DX Plugin: PSP Vintage Warmer (tweaked just right)
and others.
If I am trying to cut through even more, sometimes I'll go into the "Graphic Equalizer" and cut all the frequencies below "400"
Thats the basics!
-Rob<P ID="signature">______________
-NRG Imaging
www.nrgimaging.com
609-338-9074
[email protected]</P>
Izotope Ozone is the best plug-in I have found for voice work. It would take all day to list the settings I use, but the basics are: 5:1 multiband downward expander at -60dB for lows, -40dB for mids and -30dB for highs. Multiband 10:1 limiter at -5dB. Multiband compressor, roughly 4:1-8:1. 6:1 above 7kHz (for de-essing). EQ cut below 75Hz. 4-6dB cut at 250Hz, 2dB cut at 400Hz, 2-3dB boost at 2.5kHz, 2-3dB boost at 5kHz. Slow downward slope beginning at 14kHz. MINOR hard limiting. I generally follow with the Waves RBass plug-in.
I hear the Wave Arts TrackPlug is really good too.
> When I am processing my voice through AA 1.5 I sometimes
> use:
>
> Dynamics Processing - VocalComp1/2 +12dB1/2 Fast
> DX Plugin: PSP Vintage Warmer (tweaked just right)
> and others.
>
> If I am trying to cut through even more, sometimes I'll go
> into the "Graphic Equalizer" and cut all the frequencies
> below "400"
>
> Thats the basics!
>
> -Rob
>
I hear the Wave Arts TrackPlug is really good too.
> When I am processing my voice through AA 1.5 I sometimes
> use:
>
> Dynamics Processing - VocalComp1/2 +12dB1/2 Fast
> DX Plugin: PSP Vintage Warmer (tweaked just right)
> and others.
>
> If I am trying to cut through even more, sometimes I'll go
> into the "Graphic Equalizer" and cut all the frequencies
> below "400"
>
> Thats the basics!
>
> -Rob
>
D
DoogieDown
Guest
This may be an obscure plug-in--and an OLD one--but I get pretty good results with the compression that's bundled in EasyWaves (a DirectX plug-in). EasyWaves is a little three-way plugin from the late 90's. And, yes, the Waves in EasyWaves is the same Waves that offers the Gold, Platinum Waves Bundles, etc.
Do you have any idea where I could find this? I would be interested in tinkering with it.
> This may be an obscure plug-in--and an OLD one--but I get
> pretty good results with the compression that's bundled in
> EasyWaves (a DirectX plug-in). EasyWaves is a little
> three-way plugin from the late 90's. And, yes, the Waves in
> EasyWaves is the same Waves that offers the Gold, Platinum
> Waves Bundles, etc.
>
> This may be an obscure plug-in--and an OLD one--but I get
> pretty good results with the compression that's bundled in
> EasyWaves (a DirectX plug-in). EasyWaves is a little
> three-way plugin from the late 90's. And, yes, the Waves in
> EasyWaves is the same Waves that offers the Gold, Platinum
> Waves Bundles, etc.
>
D
DoogieDown
Guest
> Do you have any idea where I could find this? I would be
> interested in tinkering with it.
I would check eBay from time to time... I would just e-mail you mine, but it's password activated... and I haven't been able to find the password in ages.
And here's a slight correction from my earlier post: It's EZWaves--not EasyWaves. It includes a Compressor, a Reverb, and an EQ. All are very simple. The Compressor only has two controls: one ranges from zero to 24 db and is labeled "Compression." And the other is labeled "Mode" with the two extremes being "open" and "tight."
The controls appear as knobs. I keep the Compression knob at 10 o'clock and the Mode at 2 o'clock.
Another sidenote: there's some mild compression and EQ on the mic pot in my board. This EZWaves plug-in beefs up the already existing compression on the microphone--a good ole Shure SM5B.
> interested in tinkering with it.
I would check eBay from time to time... I would just e-mail you mine, but it's password activated... and I haven't been able to find the password in ages.
And here's a slight correction from my earlier post: It's EZWaves--not EasyWaves. It includes a Compressor, a Reverb, and an EQ. All are very simple. The Compressor only has two controls: one ranges from zero to 24 db and is labeled "Compression." And the other is labeled "Mode" with the two extremes being "open" and "tight."
The controls appear as knobs. I keep the Compression knob at 10 o'clock and the Mode at 2 o'clock.
Another sidenote: there's some mild compression and EQ on the mic pot in my board. This EZWaves plug-in beefs up the already existing compression on the microphone--a good ole Shure SM5B.
My vote for a plug-in Mic Processor?
WAVE ARTS' "TRACK PLUG"
www.wavearts.com
It is a great plug in and offers a gate/expander, compressor, and full featured EQ..really well thought out system. We use it a lot.
This month it's 99 bucks
WAVE ARTS' "TRACK PLUG"
www.wavearts.com
It is a great plug in and offers a gate/expander, compressor, and full featured EQ..really well thought out system. We use it a lot.
This month it's 99 bucks
is anyone processing using a basic CE or AA setting under EFFECTS - AMPLITUDE - DYNAMICS PROCESSING??
B
bigwoody
Guest
> is anyone processing using a basic CE or AA setting under
> EFFECTS - AMPLITUDE - DYNAMICS PROCESSING??
>
Yes. Take the "Great!" setting and change the comp ratio to 3:1. Leave all the other settings alone. Change the output to 12dB. Be sure you change the band Limiting to 20Hz-20000Hz
That works well.
EQ after you compress.
Parametric EQ is good. Use the Mackie High Boost.
> EFFECTS - AMPLITUDE - DYNAMICS PROCESSING??
>
Yes. Take the "Great!" setting and change the comp ratio to 3:1. Leave all the other settings alone. Change the output to 12dB. Be sure you change the band Limiting to 20Hz-20000Hz
That works well.
EQ after you compress.
Parametric EQ is good. Use the Mackie High Boost.
- Status
- This thread has been closed due to inactivity. You can create a new thread to discuss this topic.